| MRC | Criteria | Characteristic |
|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.800 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.937 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 2.750 INCHES NOMINAL |
| AHLL | FIRST LEG SLOT LENGTH | 0.372 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| AHLM | FIRST LEG SLOT WIDTH | 0.202 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.136 INCHES NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.447 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.727 NOMINAL INCHES |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.245 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.177 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 2.750 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.259 INCHES MINIMUM AND 1.275 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.913 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 2 ADDITIONAL 0.250 IN. DIA HOLES IN SECOND LEG |
| MATT | MATERIAL | STEEL COMP 321 AND STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD 1ST MATERIAL RESPONSE AND AMS 5512 ASSN STD 2ND MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
