| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | PLATE-MESHING |
| ABHP | OVERALL LENGTH | 0.719 INCHES MINIMUM AND 0.799 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.324 INCHES MINIMUM AND 0.364 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.441 INCHES MINIMUM AND 0.465 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AEBC | TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 45.0 SINGLE SECTION |
| AEBD | TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -15.0 TO 15.0 SINGLE SECTION |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.067 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.291 INCHES MINIMUM AND 0.299 INCHES MAXIMUM |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AFWY | TERMINAL THICKNESS | 0.016 INCHES NOMINAL |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| ATPA | PLATE QUANTITY | 10 |
| AXCM | TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |
| AXGR | ADJUSTMENT DEVICE TORQUE | 2.500 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 50000.0 MEGOHMS |
| AXHA | PLATE AIR GAP | 0.010 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQTM | TERMINAL LOCATION | OPPOSITE SIDES ON ADJUSTMENT CONTROL END PERPENDICULAR |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 1.5 TO 11.6 SINGLE SECTION |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | 650.0 AC PEAK SINGLE SECTION |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| CTGS | CAPACITANCE DRIFT IN PICOFARADS | 0.04 SINGLE SECTION |
| MATT | MATERIAL | STEATITE BASE |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 TAB,SOLDER LUG |
